Instructions for use

- Warning-Do not use this Product in Concentrate form on Powder coated and None treated wood surfaces.
- Warning-Always start with the lowest dilution when cleaning sensitive surfaces , test an inconspicuous area first before continuing.
- If used in Kitchens - Ensure to thoroughly rinse the surfaces and buff dry. 

For general cleaning the recommended dilution rate is: 15ml in 750ml Trigger spray of water
For medium cleaning the Recommended dilution rate is: 30ml in 750ml Trigger spray bottle of water
For Heavily soiled surfaces Recommended dilution rate is: 60ml to 90ml in 750ml Trigger spray bottle of water. Increase if required.

Advice-Always use micro fibre cloths because they attract the dirt and grease, making it easier to clean, compared to other none absorbent cloths, such as jay cloths or similar materials.

For deep cleaning ovens and heavily soiled surfaces, we offer the retractable scrappers and blades. 

Antibacterial , please allow sufficient time for the solution to do its job when cleaning surfaces in kitchens - food preparation - Washrooms areas etc.

Use a damp cloth for cleaning and a dry cloth to buff or to shine surfaces-Remove all chemical and water residue to achieve the shine

1. Oven –Internal clean - Heavy soiling - Apply solution evenly on the surfaces to be cleaned and leave to act for at least two minutes , re apply and remove heavy deposits of grease using a retractable scraper, always keep the blade flat to the surface to prevent damage. Scrape heavy soiling (Grease deposits) before replying solution and wipe clean.

2. Oven-Internal-General cleaning - Apply solution evenly on the surfaces to be cleaned and leave to act for at least 30 seconds and begin cleaning.

3. Cooker top and Hood - Apply solution evenly on the surfaces to be cleaned and leave to act for at least 30 seconds and begin cleaning.

4. Oven racking and Cooker rings - Recommended dilution 60 to 120ml in 5 litres of water, ensure all racking and other items are covered with water, dispense solution into the bowl or tray, leave the wracking to soak for a minimum of 0ne hour and clean using a regular scourer or wire ball. The longer the racks are left in soak, the easier they are to clean. Rinse with clean water after cleaning and dry.

5. Work tops – Apply solution and clean using a damp cloth. Heavy soiling, leave solution to act for 30 seconds and begin cleaning. Rinse and dry off.

6. Cupboards/draws inside and out – Apply solution and leave to act for 10 to 30 seconds, and clean using a damp cloth. Dependent on soiling.

7. Glass and Windows - Apply solution and leave to act for a few seconds and clean using a damp cloth or window cleaning kit ( Applicator and Squeegee) buff with a dry microfiber or paper towel to obtain the desired gleam.

8. Stainless steel - Depending on the surface being cleaned-For general cleaning spray and wipe with a damp cloth, buff to shine with a dry micro fibre cloth / Tea towel or paper towel. For heavy soiling Like Lift doors and frames, the solution can be applied at 50% water and 50% product, this dilution quickens the process. Ensure that you remove all chemical residue using the damp cloth process.

9. Fridge and other appliances inside and out – Apply solution and leave to act for 10 to 30 seconds, re apply and clean using a damp cloth. Ensure appliances like Microwaves, Toasters and Kettles are turned off at the plug before spraying direct into the appliances. Alternately spray the solution on to a damp cloth and clean using this safe method.

10. Windows and door frames – Apply the solution and leave to act for 10 to 30 seconds and clean using a damp cloth.

11. Painted Wall cleaning & Removing marks and stains - Spray solution on to a cloth or sponge and damp wipe the marks. If you are cleaning a larger area, it is advised to dispense 30 to 60ml of product into a bucket of warm water, using a damp micro fibre cloth, begin cleaning. Do not rub to hard on emulsion painted walls, you do not want to remove to much of the paint.

12. Floor – Apply the solution directly to the floor using the spray trigger bottle and leave to act for 10 to 30 seconds, the time required to prepare and rinse the mop, use the damp mop to absorb the applied solution, rinse and wring the mop and continue the process. For larger areas use mop and bucket, dispense 30ml of product in 5 to 10 Litres of water.

13. Bath and washing basins – Apply the solution and leave to act for 10 to 30 seconds, clean using a damp cloth, buff with a dry microfiber to obtain the gleam.

14. Tiles – Apply the solution and leave to act for 10 to 30 seconds, clean using a damp cloth and buff dry.

15. Tile grout ( Removal of Body Fats)-– Apply the solution and leave to act for 10 to 30 seconds, clean using a damp cloth or a nylon brush or flat type scourer to get in between the tiles, rinse with clean water and dry off.

16. Toilet (seat) – Apply the solution and leave to act for 10 to 30 seconds, clean using a damp cloth, buff with a dry microfiber to obtain the gleam. For the Antibacterial to do its job, leave the product for the recommended time.

17. Inside of Toilet the bowl – Apply the solution and leave to act for 10 to 30 seconds, re apply and clean using a toilet brush, flush, re apply and leave the solution to dry naturally.

18. Leather/faux leather and PVC – Lowest dilution - Apply the solution and leave to act for 10 to 30 seconds, clean using a damp cloth, buff dry. 15ml of product.

19. Furniture (wood and other materials)- Lowest dilution -Apply the solution and leave to act for 10 to 30 seconds, clean using a damp cloth, buff dry.

20. Carpets (stain removal) - Apply the solution directly to the floor using the spray trigger bottle and leave to act for 10 to 30 seconds, agitate the solution in the area and remove the stain with a microfiber cloth.

21. Stain removal for Linen and clothing - Clean care can also be used to remove certain stains from linen and some clothing. Especialy school uniforms work wear and sports wear. Please always test an inconspicuous area first before continuing. 30ml dilution is sufficient but increase if required. Spray the product on to the stain and rub together rinse clean or wash item in the washing machine.

22. Carpet Cleaning - Using an Extraction machine. Pre -Spray the area to be cleaned , using the Trigger spray bottle with 30ml in 750ml water. Prepare machine with 60 to 90ml of product and increase if required.

23. Stone and brick walls – Apply the solution and leave to act for 10 to 30 seconds, re apply and clean using a damp cloth or a hard brush, rinse with clean water. Increase dilution as required.

24. UPVC – Apply the solution and leave to act for 10 to 30 seconds, re apply and clean using a damp cloth and or a flat green scourer. Do not use hard abrasive scourers .

25. Window Lead Trims – Apply the solution at a recommended dilution and leave to act for 10 seconds, clean using a damp cloth.

26. Patio slabs – Use product in a pressure washer or similar equipment, regulate the dilution being dispensed to minimum output.

27. Removal of algae and moss deposits – Apply the solution and leave to act for 10 to 30 seconds, re apply and clean using a damp cloth or rinse with water depending on the surface being cleaned.

28. Vehicle Paint work (pressure wash)– Lowest dilution -To use the product on vehicle paintwork-Please ensure the setting on your pressure washer is set to minimum output. Rinse off thoroughly.

29. Vehicle Paint work and glass spot clean (spray trigger bottle) – Lowest Dilution-Apply the solution and leave to act for 10 seconds, clean and buff dry with a chamois or a microfiber cloth.

30. Vehicle - Internal clean - The solution will clean all surfaces of the vehicle, but take great care not to spray any areas directly where there are electrics. Spray on to carpets and upholstery-side door panels etc.

31. Vehicle-Birdlime-Tree Sap-Bugs-Lowest dilution- The solution can be used to remove bugs -tree sap-birdlime and other such deposits from the paintwork-Windscreen and glass. Apply the solution and leave to act for 10 seconds, clean and buff dry with a chamois or a microfiber cloth.

32. Vehicle Alloy wheels- Apply the solution and leave to act for 10 to 30 seconds, rinse with water and buff dry with a chamois or a microfiber cloth.

33. Chrome – Lowest dilution - Apply the solution and leave to act for 10 to 30 seconds, clean using a damp cloth, buff with a dry microfiber to obtain the desired gleam.

34. Brass - Apply the solution and leave to act for 10 seconds, clean and buff dry with a microfiber cloth.

35. Graffiti Removal - Removes some graffiti dependant on what type of paint it is. Always test a small area first before continuing. Start off with 60ml and increase as required. use Scourer-hard brush or other suitable equipment. Spray the solution and agitate in to the surface. Continue process.

36. Altro and kitchen safety flooring - Apply the solution and leave to act for 10 to 30 seconds, scrub the floor with scourer tank scrubber or any other suitable equipment. Rinse off and allow to dry.

37. Vinyl Flooring - Apply solution and leave to act for 10 to 30 seconds begin cleaning, use mop & bucket with scourer to remove heavily soiled areas like edges and corner. On larger areas a tank scrubber or scrubber dryer can be used. 

We would be pleased to hear from you if you have cleaned a surfaces not listed.

A powerful High concentrate multipurpose cleaner with apple scent.
Suitable for most surfaces

Unit 1D, Hampden Road, Pocklington Industrial Estate, Pocklington, York, YO42 1NR

01759 307590

Need help?

Contact us to book a FREE demonstration by one of our team at your premises.